Search

New Prusa 3D Printers

Over the past months, we have been busy rearranging our 3D printer room to make a more usable workspace for some new machines. The new 3D printers we have are made by a company called Prusa Research. These printers are filament extrusion machines like the Ender 3 and Makerbot printers we already had, but these are more accurate and capable of producing higher-quality prints.


We have three Prusa MK3S+ printers and two Prusa Mini+ printers. In the short time, we have had these printers, they have already accumulated a combined print time of 43 days, 4 hours, and 20 minutes and used 2.715 km (1.68 miles) of filament. These machines will be the workhorses we need to keep our members 3d printing for years to come. If you need any more information about these printers, consult the specs below and as always, feel free to send us an email if you need more information.


MK3S + Machine Specs


  • Build Volume 250 x 210 x 210 mm (9.84" x 8.3" x 8.3")

  • Layer heights from 0.05 - 0.35 mm (up to 0.55 mm with 0.8mm nozzle)

  • Nozzle diameters available 0.4 mm standard, as well as 0.25, 0.l6, and 0.8 mm

  • Filament Diameter of 1.75 mm

  • Supported materials include a wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, PVB, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Carbon filled, Woodfill and other filled materials. But please note some materials require special nozzles and special bed preparation. Please be sure to check with us first before printing ANYTHING besides standard PLA.

  • Max travel speed 200+ mm/s

  • Max nozzle temperature 300° C

  • Max heatbed temperature 120° C

  • Extruder - Direct drive, Bondtech gears, E3D V6 (we also have machines with REVO V6 fast swap nozzles)

Mini+ Machine Specs


  • Build Volume 180 x 180 x 180 mm (7 x 7 x 7 in)

  • Layer height 0.05 – 0.25 mm

  • Nozzle 0.4 mm

  • Filament diameter of 1.75 mm

  • Supported materials include a wide range of thermoplastics, including PLA, PETG, ASA, ABS, PC (Polycarbonate), CPE, PVA/BVOH, PVB, HIPS, PP (Polypropylene), Flex, nGen, Nylon, Carbon filled, Woodfill and other filled materials. But please note some materials require special nozzles and special bed preparation. Please be sure to check with us first before

  • Max travel speed 200+ mm/s

  • Max nozzle temperature 280° C

  • Max heatbed temperature 100° C

  • Extruder Bowden system with 3:1 gearing


#3dprinting #equipment

0 views0 comments

Recent Posts

See All